twisties!
The drivetrain is a marvel of engineering excellence. Purpose built sprockets and a twin belt drive retain the stock gear ratio. The belts are a proprietary material and design, manufactured by Gates, the industry leader in belt technology and production. Twin-piston disc brake calipers are standard equipment, providing excellent stopping power under all conditions. Check out the optional Performance Brake Upgrade, a drilled rotor with nickel plating and a super-slick billet aluminum caliper.
A meticulously styled body with our custom-designed LED tombstone taillights will turn heads wherever you may roam. And with our internally mounted Space SaverT hinge design and over 6 cubic feet of trunk storage capacity, there's not much you'll ever have to leave behind. |
| |
|
 |
| Specifications |
| For the Daytona Trike |
|
| |
| Rated Load Capacity |
650 lbs*
|
| Wheel |
15 X 6.5 in, 5 on 100 mm bolt patern, 4.75 in backspacing
|
| Wheel Base |
72.5 in (184.2 cm)
|
| Wheel Base with Power Trak |
73.5 in (186.7 cm)
|
| Overall Length |
102.5 in (260.4 cm)
|
| Overall Length with Power Trak |
103.5 in (262.9 cm)
|
| Track |
47.875 in (121.6 cm)
|
| Trike Width |
59 in (149.9 cm)
|
| Ground Clearance |
5 in (12.7 cm) |
| Trunk Storage Capacity |
6.3 cu. Ft. |
| Trailer Hitch Ball Height (1-7/8" ball) |
13 in (33 cm)
|
|
| (*300 lb coil spring weight; lower spring weights available) |
|
| |
|
|
| Features |
| For the Daytona Trike |
|
| |
Warranty
3-year/50,000 mile limited warranty includes parts and labor on material and workmanship defects. Inquire with an Authorized Dealer or California Sidecar for specific terms of the warranty.
|
| |
Suspension
Hands down, the most innovative suspension engineering design on the market! Based on Indy car technology, the DAYTONA features a vertically stabilized opposing rocker mono shock independent suspension, plus:
- Purpose designed QA1 shock for the Opposing Rocker arm system
- QA1 300Lb. linear wound racing spring designed to accommodate a loaded weight of up to 650lbs. inclusive of accessories, luggage, and passengers. (Lighter spring weights available)
- Optional preload adjuster for simple spring preload adjustment to compensate for varying loads
|
| |
Drivetrain
- Twin reduction jackshaft belt drive
- Sprockets – 8620 gas carburized and continuous wire E.D.M. splines with new transmission sprocket.
- Belts – Twin, special construction belts by Gates, featuring 90mm wide belt.
|
| |
Disc Brake System
Outstanding braking performance is supplied by the standard Varga calipers, 11.5” purpose designed rotors, and braided stainless steel brake lines throughout. To add even more style and performance, check out the PERFORMANCE BRAKE UPGRADE.
|
| |
Wheels & Tires
- 15 x 6.5, 5 x 100mm bolt pattern, Split 5-spoke w/ silver powder coat finish
- 205/60R15 All Season radial tire
Chrome Wheel Upgrade available.
|
| |
Superior Styling & Finish
In typical California Sidecar Trike fashion, we’ve crafted a body with an aggressive, sleek style that perfectly complements the style of the Harley Davidson. The body is equipped with custom tombstone LED taillights that incorporate the brake, running and turn signal lights into one cool chrome unit. Also standard are the rear chrome trim accent strips and 4 LED auxiliary running lights to increase visibility. Each painted body comes with the finest finish in the business. Our in-house fiberglass and paint departments insure the highest degree of quality control and the color match capability is unsurpassed. Bodies are wet sanded and then polished in a two-step process to achieve the amazing paint finish that we demand.
|
| |
Bolt-on Installation
No welding or cutting necessary!
|
| |
| |
|
|
|
| Accessories |
| For the Daytona Trike |
|
|
Power Trak HD™ = Ultimate Performance
- 8° triple clamps provide excellent steering responsiveness
- Triple clamps are CNC machined from 6061-T6 aluminum
- Steering stem is CNC machined from 1045 TG&P solid steel
- New tapered roller bearing for lower triple clamp
What makes the Power Trak HD™ Uniquely Superior?
- Dimensions of the lower triple clamp have been significantly increased, providing greater strength than the OEM cast steel lower clamp
- No fork tube replacement necessary. Locations have been optimized for the Daytona trike ride height
- Extended length fork caps increase the load-installed height of the spring to keep the front end from sagging due to added forward weight bias of a trike
How Does Power Trak™ work?
By extending the fork tubes and changing the angle of the triple clamps, we have reduced the trial which creates "easy steering without oversteering".
We're so confident in our product, that if you are not completely satisfied with the results, we will give you a full and prompt refund. |
| |
Chrome Wheel Well Trim
 Genuine chrome fender trim "eyebrows", custom tailored to the Cobra trike body. The quality is the same as that of high end import autos such as BMW and Mercedes. They're set in rubber molding for an unparalleled accent feature.
|
| |
Electric Reverse Gear – Belt Driven
- Requires NO modification to the OEM engine or transmission
- Belt-driven off of our CSC drivetrain by a purpose-built electric gear motor
- Utilizes the CSC gear reduction to minimize power from electric motor
- Option comes installed on the kit from the factory, so there is virtually no extra installation time
|
| |
Ground Effects 
Superbly styled to complement the COBRA trike conversion, our Ground Effects do not decrease groundclearance of the rig.They come complete with turn-signal activated cornering lights, rubber foot recess protectors and logo plaques.
|
| |
Light Bar w/ Kuryakyn LED Lights
 Custom fiberglass light bar with 8 Kuryakyn LED lights increases visibility to other drivers and looks cool doing it. Also available with chrome grill accents (shown) for the LED lights.
|
| |
Performance Brake Upgrade
 Super-charge the braking performance and give your Daytona trike kit a slick custom look. A nickel plated, drilled rotor helps promote faster cooling of the rotor surface and increase braking efficiency. Our purpose built caliper is CNC machined, red-anodized, and engraved with "California Sidecar” and “Daytona”, providing a super-sharp accent to an already artful design.
|
| |
StonGard™ Fender Kit
Protect the paint finish on the leading edge of your trike's fenders against rock chips and passenger heel scuff marks with a custom-cut four piece kit of 80 mil clear urethane film. When applied at our factory, the kit comes with StonGard's 3-year limited warranty covering the repair of the trike's finish in the protected areas.
Suspension Preloader
Air activated shock spring preloader allows for adjustable spring preload to accommodate varying rider, passenger and gear weights
|
| |
Trailer Hitch Kit
California Sidecar Trike engineered this trailer hitch to be completely invisible when the receiver tongue is not installed. Solid steel plate construction, zinc-plated and attached with Grade 8 fasteners. Comes complete with chrome receiver tongue, D.O.T. certified 1-7/8" ball, hitch pin with safety clip and rings for safety chain attachment. (Ball height is 13")
|
| |
Trunk Cap & Storage Compartment
This feature provides an extra .6 cu ft of lockable storage space while adding a custom-finished look to the area behind the passenger seat. Available for all models.
|
| |
Wheel Upgrades
Vision 5-spoke Chrome Wheel Upgrade
 |
HD style 9-spoke Chrome Wheel Upgrade
 |
|
|
|
|
